Official Technical Data Sheet
Mapro Gray Cement
Heavy-Duty OPC Grey Cement
Category: Finishing
Classification: OPC 43 Grade (>43 N/mm²)
Document Ref: TDS-RHR-015
1. Product Description
Ordinary Portland Cement (OPC 43) for heavy-duty structural pointing.
Key Performance Advantages:
- ✓ OPC 43 High-Strength Grade: Delivers >43 N/mm² 28-day compressive strength for durable structural repairs and bedding.
- ✓ Consistent Particle Distribution: Controlled grinding ensures smooth workability and predictable hydration strength gain.
- ✓ Zero-Waste 1kg Pouch: Ideal for plumbers, electricians, tilers, and maintenance teams who don't need a 50kg sack.
- ✓ Universal Aggregate Compatibility: Works seamlessly with standard sand, aggregates, and polymer bonding additives.
2. Technical & Physical Properties
| Standard Packaging | 1KG Pouch |
|---|---|
| Color | Industrial Grey |
| Water Ratio | 0.45 - 0.50 per kg |
| Grade | OPC 43 |
| Initial Set | 30 Minutes (minimum) |
| Final Set | 10 Hours (maximum) |
| Compressive Strength (28d) | > 43 N/mm² |
| Shelf Life | 12 Months (in dry conditions) |
3. Site Surface Preparation & Application Method
Step 1: Surface Preparation
Ensure masonry, concrete, or ceiling surface is sound and free from dust, form-release oil, grease, and loose mortar particles.
Step 2: Clean Water Mixing
Mix Mapro Cement with clean water (0.45–0.50 ratio) or graded fine aggregate/pigment to achieve a cohesive, workable mortar paste.
Step 3: Trowel / Float Application
Press firmly into tile joints, pointing lines, or repair patches using a steel trowel or pointing tool, compacting thoroughly.
Step 4: Finishing & Curing
Strike off excess material cleanly with a damp sponge and mist-cure cementitious repairs for 3–7 days to maximize 28-day strength.
Health & Safety
Cementitious and chemical construction products are alkaline when mixed with water. Wear protective gloves and safety eyewear during mixing and application. Wash splashes from skin or eyes immediately with clean water.
Technical Note
Values stated are typical application figures under normal site conditions (25–30°C). Site temperature and substrate porosity may affect open time and coverage. Technical site guidance is available on bulk commercial orders.