← Back to New Stylish Grout
Request Bulk Quote
RHR & Company

Official Technical Data Sheet

New Stylish Grout

Premium Color-Stable Ceramic & Porcelain Grout

Category: Grouts

Classification: Unsanded Narrow-Joint Tile Grout

Document Ref: TDS-RHR-007

1. Product Description

Ready-to-use polymer-enriched grout in 24 vibrant colours.

Key Performance Advantages:

  • ✓ 24 Color-Fast Colours: Vibrant architectural colors that resist UV fading and yellowing over years of service.
  • ✓ Water & Stain Resistant: Dense polymer-enriched finish repels moisture, soap scum, and household kitchen stains.
  • ✓ Smooth Narrow-Joint Formula: Unsanded micro-fine texture glides effortlessly into 1mm–3mm rectified porcelain & ceramic joints.
  • ✓ 1kg Ready Bottle Packaging: Moisture-sealed 1kg plastic bottle prevents site wastage and extends shelf life up to 24 months.
New Stylish Grout

2. Technical & Physical Properties

Standard Packaging 1 kg Plastic Bottle
Available Colors 24 Colours
Type Unsanded Cementitious Grout
Joint Width 1 - 3 mm
Open Time 20 - 30 Minutes
Final Setting Time 24 Hours
Compressive Strength > 15 N/mm²
Water Resistance Excellent
Shelf Life 24 Months (Sealed, dry conditions)

3. Site Surface Preparation & Application Method

Step 1: Joint Preparation

Ensure tile adhesive has cured for at least 24 hours. Rake out all spacer clips, dust, excess adhesive, and standing water from tile joints.

Step 2: Proportionate Mixing

Add grout powder gradually to clean water per the Technical Data Sheet ratio. Mix to a smooth, lump-free creamy paste and let slake for 3 minutes.

Step 3: Diagonal Float Application

Work grout firmly into joints using a rubber grout float held at a 45° angle, moving diagonally across tiles to pack joints completely.

Step 4: Sponge Clean & Cure

After 15–20 minutes as surface haze forms, wipe diagonally with a damp (not dripping) sponge. Polish dry haze with a microfiber cloth after 24 hours.

Health & Safety

Cementitious and chemical construction products are alkaline when mixed with water. Wear protective gloves and safety eyewear during mixing and application. Wash splashes from skin or eyes immediately with clean water.

Technical Note

Values stated are typical application figures under normal site conditions (25–30°C). Site temperature and substrate porosity may affect open time and coverage. Technical site guidance is available on bulk commercial orders.