← Back to Plaster of Paris
Request Bulk Quote
RHR & Company

Official Technical Data Sheet

Plaster of Paris

Ultra-Fine Gypsum Plaster for Interior Finishing

Category: Finishing

Classification: High-Purity Architectural Gypsum Plaster

Document Ref: TDS-RHR-013

1. Product Description

Premium-grade, ultra-fine gypsum plaster for interior ceilings.

Key Performance Advantages:

  • ✓ Brilliant White Ultra-Fine Grind: High-purity gypsum delivers glass-smooth ceilings, crisp decorative mouldings, and paint-ready walls.
  • ✓ Controlled Fast Setting (10–15 Min): Initial set in 10–15 minutes and final set in 20–30 minutes keeps ceiling & cornice crews moving fast.
  • ✓ Low-Shrinkage Crack Resistance: Refined particle grading minimizes drying cracks across 5–30mm build thicknesses.
  • ✓ Moisture-Sealed 3kg Pouch: Convenient 3kg pouch protects gypsum freshness against site humidity up to 12 months.
Plaster of Paris

2. Technical & Physical Properties

Standard Packaging 3KG Pouch
Color Brilliant White
Water Ratio 0.7 - 0.8 L per 1 kg
Initial Setting Time 10 - 15 Minutes
Final Setting Time 20 - 30 Minutes
Application Thickness 5 - 30 mm per Layer
Compressive Strength > 5 N/mm²
Shelf Life 12 Months (in dry conditions)

3. Site Surface Preparation & Application Method

Step 1: Surface Preparation

Ensure masonry, concrete, or ceiling surface is sound and free from dust, form-release oil, grease, and loose mortar particles.

Step 2: Clean Water Mixing

Sprinkle Plaster of Paris slowly into clean water (0.7–0.8L per kg) and mix to a lump-free creamy paste. Mix only what can be used within 10 minutes.

Step 3: Trowel / Float Application

Apply evenly with a steel trowel or putty blade in 5–30mm layers for ceilings, cornices, or wall skimming before initial set begins.

Step 4: Finishing & Curing

Smooth to a glass-white finish before final set (20–30 min). Allow full drying in dry interior conditions prior to primer and paint.

Health & Safety

Cementitious and chemical construction products are alkaline when mixed with water. Wear protective gloves and safety eyewear during mixing and application. Wash splashes from skin or eyes immediately with clean water.

Technical Note

Values stated are typical application figures under normal site conditions (25–30°C). Site temperature and substrate porosity may affect open time and coverage. Technical site guidance is available on bulk commercial orders.