← Back to Readymix Patlo
Request Bulk Quote
RHR & Company

Official Technical Data Sheet

Readymix Patlo

Ready-to-Use Waterproofing Compound

Category: Waterproofing

Classification: Heavy-Duty Ready-Mixed Waterproof Barrier

Document Ref: TDS-RHR-012

1. Product Description

A highly durable and easy-to-apply waterproofing compound suitable for critical wet areas.

Key Performance Advantages:

  • ✓ Ready-to-Use Consistency: Pre-proportioned waterproofing compound minimizes site mixing errors and speeds up application.
  • ✓ High-Build Structural Barrier: Applies via brush or trowel to seal critical roof slabs, joints, parapet walls, and wet rooms.
  • ✓ Weather & Heat Resilient: Engineered for extreme summer rooftop temperatures across Sindh, Balochistan & Southern Punjab.
  • ✓ 1kg to 10kg Contractor Packs: Flexible packaging options (1, 2, 5, 10 kg) for zero wastage on any project scale.
Readymix Patlo

2. Technical & Physical Properties

Standard Packaging 1, 2, 5, 10 kg Packs
Type Ready-Mixed Compound
Application Method Brush or Trowel

3. Site Surface Preparation & Application Method

Step 1: Substrate Cleaning

Remove all dust, laitance, oil, peeling paint, and salt efflorescence by wire-brushing. Repair honeycombs or cracks >2mm before coating.

Step 2: Pre-Dampening / Priming

Lightly dampen absorbent concrete or plaster surfaces with clean water to SSD (saturated surface-dry) condition with no standing puddles.

Step 3: First Protective Coat

Apply the first uniform coat using a stiff brush, roller, or trowel (for Readymix Patlo), working thoroughly into corners, coves, and pipe penetrations.

Step 4: Cross-Coat & Flood Test

Once touch-dry (2–4 hours), apply the second coat at a 90° perpendicular angle. Allow 24–48 hours cure before flood testing or tiling.

Health & Safety

Cementitious and chemical construction products are alkaline when mixed with water. Wear protective gloves and safety eyewear during mixing and application. Wash splashes from skin or eyes immediately with clean water.

Technical Note

Values stated are typical application figures under normal site conditions (25–30°C). Site temperature and substrate porosity may affect open time and coverage. Technical site guidance is available on bulk commercial orders.