Official Technical Data Sheet
Super Sonex Tile Bond
Polymer Modified Cementitious Tile Adhesive
Category: Tile Adhesives
Classification: Economical Cementitious Tile Bond
Document Ref: TDS-RHR-006
1. Product Description
Polymer modified, cost-effective cement-based tile adhesive suitable for standard ceramic tile fixing on floors and walls.
Key Performance Advantages:
- ✓ Polymer Modified Formula: Dependable adhesion for everyday ceramic tile fixing.
- ✓ Cost-Effective Choice: Smart value for simple tiling projects.
- ✓ Smooth Workability: Easy to spread and apply on site.
- ✓ Suitable for Floors and Walls: Versatile for general interior applications.
2. Technical & Physical Properties
| Type | Polymer Modified Cementitious Tile Adhesive |
|---|---|
| Appearance | Grey powder |
| Composition | OPC cement, graded sand, polymer additives |
| Water required | 25–30% (approx. 5–6 litres per 20 kg bag) |
| Compressive strength | ~0.7 N/mm² @ 28 days |
| Peel-off strength | ~9 KN/m |
| Pot life | Approx. 1.5 hours at 30°C |
| Coverage | 30–35 sq. ft per 20 kg bag at 3–5mm thickness |
| Packaging | 20 kg PP Woven Bag |
| Shelf life | 6 months in original, unopened packaging |
| Storage | Store in a dry, cool place below 35°C, away from direct sunlight |
3. Site Surface Preparation & Application Method
Step 1: Surface Preparation
Ensure the concrete, screed, or plaster substrate is cured, flat, structurally sound, and free from dust, oil, loose laitance, or curing compounds.
Step 2: Mechanical Mixing
Gradually add the 20kg bag of RHR Tile Bond to 5–6 liters of clean water. Mix with a slow-speed drill mixer until a smooth, lump-free paste forms; slake 5 minutes and remix.
Step 3: Notched Trowel Combing
Key a thin contact layer onto the substrate with the flat edge of the trowel, then comb uniform ribs at a 45° angle using a notched trowel (3–5mm bed).
Step 4: Bedding & Grouting
Press tiles firmly into wet adhesive ribs with a slight twisting motion for 100% back-butter coverage on large formats. Allow 24 hours cure before grouting.
Health & Safety
Cementitious and chemical construction products are alkaline when mixed with water. Wear protective gloves and safety eyewear during mixing and application. Wash splashes from skin or eyes immediately with clean water.
Technical Note
Values stated are typical application figures under normal site conditions (25–30°C). Site temperature and substrate porosity may affect open time and coverage. Technical site guidance is available on bulk commercial orders.