Official Technical Data Sheet
Total Grout
Versatile All-Purpose Flexible Tile Grout
Category: Grouts
Classification: Flexible All-Purpose Tile Grout
Document Ref: TDS-RHR-009
1. Product Description
An all-purpose, flexible grout for joints from 1-10mm.
Key Performance Advantages:
- ✓ Single-Product Versatility (1–10mm): Handles both narrow and medium-wide joints from 1mm to 10mm, simplifying job-site inventory.
- ✓ Polymer-Modified Flexibility: Absorbs minor substrate vibration and thermal expansion without hairline cracking.
- ✓ Low Water Absorption: Reduced water absorption and high abrasion resistance for wet areas and busy corridors.
- ✓ 24 Standard Colours: Curated everyday color range in convenient 1kg moisture-barrier pouches.
2. Technical & Physical Properties
| Standard Packaging | 1 kg Pouch |
|---|---|
| Available Colors | 24 Colours |
| Type | Flexible All-Purpose Grout |
| Joint Width | 1 - 10 mm |
| Water Ratio | 0.20 - 0.25 L per 1 kg |
| Open Time | 20 Minutes |
| Compressive Strength | > 18 N/mm² |
| Flexibility Class | S1 Deformable |
| Shelf Life | 12 Months (in dry conditions) |
3. Site Surface Preparation & Application Method
Step 1: Joint Preparation
Ensure tile adhesive has cured for at least 24 hours. Rake out all spacer clips, dust, excess adhesive, and standing water from tile joints.
Step 2: Proportionate Mixing
Add grout powder gradually to clean water per the Technical Data Sheet ratio. Mix to a smooth, lump-free creamy paste and let slake for 3 minutes.
Step 3: Diagonal Float Application
Work grout firmly into joints using a rubber grout float held at a 45° angle, moving diagonally across tiles to pack joints completely.
Step 4: Sponge Clean & Cure
After 15–20 minutes as surface haze forms, wipe diagonally with a damp (not dripping) sponge. Polish dry haze with a microfiber cloth after 24 hours.
Health & Safety
Cementitious and chemical construction products are alkaline when mixed with water. Wear protective gloves and safety eyewear during mixing and application. Wash splashes from skin or eyes immediately with clean water.
Technical Note
Values stated are typical application figures under normal site conditions (25–30°C). Site temperature and substrate porosity may affect open time and coverage. Technical site guidance is available on bulk commercial orders.