← Back to Aqua Shield
Request Bulk Quote
RHR & Company

Official Technical Data Sheet

Aqua Shield

Advanced Waterproofing Coating

Category: Waterproofing

Classification: Flexible Elastomeric Waterproofing System

Document Ref: TDS-RHR-010

1. Product Description

A high-performance waterproofing coating designed to provide superior protection.

Key Performance Advantages:

  • ✓ Seamless Waterproof Membrane: Cures into a joint-free, water-impermeable barrier over concrete, screed, and masonry surfaces.
  • ✓ Crack-Bridging Flexibility: Accommodates hairline substrate thermal movement on Pakistani rooftops and wet rooms.
  • ✓ Easy Brush or Roller Application: Applies smoothly in two perpendicular coats prior to tiling or protective screed.
  • ✓ Stops Dampness & Seepage: Protects bathrooms, sunken slabs, balconies, water tanks, and foundations from water ingress.
Aqua Shield

2. Technical & Physical Properties

Standard Packaging 1kg Pouch
Type Waterproofing Coating
Application Method Brush or Roller

3. Site Surface Preparation & Application Method

Step 1: Substrate Cleaning

Remove all dust, laitance, oil, peeling paint, and salt efflorescence by wire-brushing. Repair honeycombs or cracks >2mm before coating.

Step 2: Pre-Dampening / Priming

Lightly dampen absorbent concrete or plaster surfaces with clean water to SSD (saturated surface-dry) condition with no standing puddles.

Step 3: First Protective Coat

Apply the first uniform coat using a stiff brush, roller, or trowel (for Readymix Patlo), working thoroughly into corners, coves, and pipe penetrations.

Step 4: Cross-Coat & Flood Test

Once touch-dry (2–4 hours), apply the second coat at a 90° perpendicular angle. Allow 24–48 hours cure before flood testing or tiling.

Health & Safety

Cementitious and chemical construction products are alkaline when mixed with water. Wear protective gloves and safety eyewear during mixing and application. Wash splashes from skin or eyes immediately with clean water.

Technical Note

Values stated are typical application figures under normal site conditions (25–30°C). Site temperature and substrate porosity may affect open time and coverage. Technical site guidance is available on bulk commercial orders.