Aqua Shield — Advanced Waterproofing Coating by RHR & Company Pakistan
Waterproofing Flexible Elastomeric Waterproofing System

Aqua Shield

Advanced Waterproofing Coating

Standard Pack
1kg Pouch
Performance Index
100% Factory QC

A high-performance waterproofing coating designed to provide superior protection.

✓ Direct Factory Supply (Karachi, Hyderabad, Sukkur) ✓ In-House Quality Control

Compare Other Waterproofing:

Seamless Waterproof Membrane

Cures into a joint-free, water-impermeable barrier over concrete, screed, and masonry surfaces.

Crack-Bridging Flexibility

Accommodates hairline substrate thermal movement on Pakistani rooftops and wet rooms.

Easy Brush or Roller Application

Applies smoothly in two perpendicular coats prior to tiling or protective screed.

Stops Dampness & Seepage

Protects bathrooms, sunken slabs, balconies, water tanks, and foundations from water ingress.

Product Overview & Uses

Aqua Shield is an advanced, ready-to-use waterproofing solution that forms a flexible, seamless, and durable membrane. Designed for a variety of surfaces, it ensures maximum protection against water penetration, keeping structures safe from dampness and related damages.

Technical Data Sheet

Printable PDF View →
Standard Packaging 1kg Pouch
Type Waterproofing Coating
Application Method Brush or Roller
Site Execution Guide

Recommended Application Process

1
01

Substrate Cleaning

Remove all dust, laitance, oil, peeling paint, and salt efflorescence by wire-brushing. Repair honeycombs or cracks >2mm before coating.

2
02

Pre-Dampening / Priming

Lightly dampen absorbent concrete or plaster surfaces with clean water to SSD (saturated surface-dry) condition with no standing puddles.

3
03

First Protective Coat

Apply the first uniform coat using a stiff brush, roller, or trowel (for Readymix Patlo), working thoroughly into corners, coves, and pipe penetrations.

4
04

Cross-Coat & Flood Test

Once touch-dry (2–4 hours), apply the second coat at a 90° perpendicular angle. Allow 24–48 hours cure before flood testing or tiling.

Where to Use Aqua Shield

Reliable barrier protection against seepage, monsoon rain, and salinity.

Bathrooms & Sunken Slabs

Prevents floor-to-ceiling seepage in multi-storey buildings.

Rooftops & Balconies

Protects concrete slabs against monsoon rain & thermal cracks.

Water Tanks & Basements

Blocks positive and dampness water ingress in masonry.

Coastal Anti-Salinity (Kalar)

Defends Karachi & Sindh walls against efflorescence.

Frequently Asked Questions — Aqua Shield

Where should Aqua Shield Waterproofing be applied?

Aqua Shield is ideal for sunken bathroom slabs, shower walls, kitchen wet zones, roof terraces, balconies, and water-retaining masonry structures prior to tile installation.

How many coats of Aqua Shield are recommended?

Apply a minimum of 2 coats by brush or roller, applying the second coat perpendicular (at 90 degrees) to the first coat once touch-dry (after 2–4 hours).

Can tiles be installed over Aqua Shield?

Yes. Once Aqua Shield has fully cured, tiles can be bonded directly using a polymer-modified C2 adhesive such as RHR ReadyMix Tile Bond.