High-Performance C2 Grade Tile Adhesive
ReadyMix Tile Bond (C2) is a premium cement-based tile adhesive designed for strong, durable, and long-lasting tile installations.
Compare Other Tile Adhesives:
Resists water penetration, suitable for bathrooms, kitchens, and pool surrounds
Performs reliably in exterior applications and extreme temperatures
21.5 KN/m peeloff strength for long-lasting bond on walls and floors
Polymer modification limits shrinkage cracking common in standard cement adhesives
Readymix Tile Bond is a polymer modified, cement-based tile adhesive (Type C-2) formulated for fixing ceramic tiles, marble, granite, and decorative claddings on interior and exterior walls and floors. The addition of polymer modifiers improves adhesion strength, reduces shrinkage cracking, and gives the product reliable performance across a wide range of surfaces and weather conditions making it suitable for everything from residential flooring to exterior facades and swimming pool tiling.
Estimating Bags for Your Site?
Calculate exact ReadyMix Tile Bond quantities by square footage.
| Appearance | Grey powder |
|---|---|
| Composition | OPC cement, selected silica aggregate, polymer additives |
| Maximum aggregate size | 1.0 mm |
| Water required | 25–30% (approx. 5–6 litres per 20 kg bag) |
| Compressive strength | 1.25 N/mm² at 28 days |
| Peel-off strength | 21.5 KN/m |
| Pot life | Approx. 2 hours at 30°C |
| Coverage | 30–35 sq. ft per 20 kg bag at 3–5mm thickness |
| Packaging | 20 kg plastic bag |
| Shelf life | 6 months in original, unopened packaging |
| Storage | Store in a dry, cool place below 35°C, away from direct sunlight |
Ensure the concrete, screed, or plaster substrate is cured, flat, structurally sound, and free from dust, oil, loose laitance, or curing compounds.
Gradually add the 20kg bag of RHR Tile Bond to 5–6 liters of clean water. Mix with a slow-speed drill mixer until a smooth, lump-free paste forms; slake 5 minutes and remix.
Key a thin contact layer onto the substrate with the flat edge of the trowel, then comb uniform ribs at a 45° angle using a notched trowel (3–5mm bed).
Press tiles firmly into wet adhesive ribs with a slight twisting motion for 100% back-butter coverage on large formats. Allow 24 hours cure before grouting.
Engineered for high-grip tile and stone installations across Pakistani climates.
Strong polymer-modified grip on floor and wall tiles.
High peel-off & shear bond strength for heavy slabs.
Moisture-resistant durability in wet zones (ReadyMix C2).
Trusted across commercial towers, villas & retail floors.
Official documentation, sample dispatch, and factory-direct pricing for contractors and engineers.
Yes. It is formulated to resist water penetration, making it suitable for wet areas and swimming pools.
Yes. It is heat-proof and weather-resistant, suitable for both interior and exterior surfaces.
Approximately 30–35 sq. ft per 20 kg bag at 3–5mm thickness.
Yes, it's suitable for both floor and wall applications, indoors and outdoors.
Allow 24 hours for the adhesive to set before applying tile grout.
Approximately 5–6 litres of clean water per 20 kg bag.
Yes, it's formulated to handle heavier materials including marble, granite, and decorative cladding.
It's designed to be easy to mix and apply, but professional installation is recommended for larger areas or natural stone, where clamping and technique matter more.