Readicam Tile Bond — Type C1 Polymer Modified Tile Adhesive by RHR & Company Pakistan
Tile Adhesives High-Grip Polymer Tile Adhesive

Readicam Tile Bond

Type C1 Polymer Modified Tile Adhesive

Standard Pack
20 kg PP Woven Bag
Performance Index
100% Factory QC

Polymer modified cement based tile adhesive designed for fixing normal ceramic tiles on floors and walls with strong, dependable bonding performance.

✓ Direct Factory Supply (Karachi, Hyderabad, Sukkur) ✓ In-House Quality Control

Polymer Modified Formula

Improved adhesion compared to plain cementitious adhesives.

Strong Bonding Performance

Reliable hold for standard ceramic tile fixing.

Suitable for Floors and Walls

Versatile for general interior applications.

Product Overview & Uses

Readicam Tile Bond is a polymer modified, cement based tile adhesive (Type C1), designed for fixing normal ceramic tiles on floors and walls. It delivers strong, dependable bonding performance for everyday tiling work — a reliable step up from basic cementitious adhesives, just below Readymix Tile Bond in the range.

Applications

  • Fixing normal ceramic tiles on interior floors and walls
  • General residential and light commercial tiling work
  • Projects needing strong, reliable bonding at a standard grade

Directions for Use

  • Surface Preparation: Prepare the surface clean, sound, and free from dust, grease, or loose material.
  • Mixing: Mix one 20 kg bag with approximately 5–6 litres of clean water to a smooth, lump free consistency, and use within its pot life (approx. 1.5 hours).
  • Application: Apply with a notched trowel and press tiles firmly into place.
  • Finishing: Allow tiling to set for 24 hours before grouting, and clean tools with water immediately after use.

Estimating Bags for Your Site?

Calculate exact Readicam Tile Bond quantities by square footage.

Open Calculator →

Technical Data Sheet

Printable PDF View →
Type Polymer Modified Cementitious Tile Adhesive (C1)
Appearance Grey powder
Composition OPC cement, graded sand, polymer additives
Water required 25–30% (approx. 5–6 litres per 20 kg bag)
Compressive strength ~1.1 N/mm² @ 28 days
Peel-off strength ~18 KN/m
Pot life Approx. 1.5 hours at 30°C
Coverage 30–35 sq. ft per 20 kg bag at 3–5mm thickness
Packaging 20 kg PP Woven Bag
Shelf life 6 months in original, unopened packaging
Storage Store in a dry, cool place below 35°C, away from direct sunlight
Site Execution Guide

Recommended Application Process

1
01

Surface Preparation

Ensure the concrete, screed, or plaster substrate is cured, flat, structurally sound, and free from dust, oil, loose laitance, or curing compounds.

2
02

Mechanical Mixing

Gradually add the 20kg bag of RHR Tile Bond to 5–6 liters of clean water. Mix with a slow-speed drill mixer until a smooth, lump-free paste forms; slake 5 minutes and remix.

3
03

Notched Trowel Combing

Key a thin contact layer onto the substrate with the flat edge of the trowel, then comb uniform ribs at a 45° angle using a notched trowel (3–5mm bed).

4
04

Bedding & Grouting

Press tiles firmly into wet adhesive ribs with a slight twisting motion for 100% back-butter coverage on large formats. Allow 24 hours cure before grouting.

Where to Use Readicam Tile Bond

Engineered for high-grip tile and stone installations across Pakistani climates.

Ceramic & Porcelain Tiles

Strong polymer-modified grip on floor and wall tiles.

Marble, Granite & Stone

High peel-off & shear bond strength for heavy slabs.

Bathrooms, Kitchens & Pools

Moisture-resistant durability in wet zones (ReadyMix C2).

Residential & High-Rise

Trusted across commercial towers, villas & retail floors.

Frequently Asked Questions

Is Readicam Tile Bond polymer modified?

Yes, it uses a polymer modified formula for improved bonding strength and workability.

Can it be used for both floors and walls?

Yes, it's suitable for general interior floor and wall tiling.

How long before I can grout?

Allow 24 hours after tiling before applying grout.

How much water do I need per bag?

Approximately 5–6 litres of clean water per 20 kg bag.

What's the difference between this and Readymix Tile Bond?

Readymix Tile Bond is a higher-strength formulation with waterproofing for exterior and heavy duty use. Readicam Tile Bond is built for reliable, everyday ceramic tiling at a more accessible grade.