High-Strength Sanded Grout for Wide Joints
A cement-based, sanded grout engineered for joints from 2-12mm.
Compare Other Grouts:
Graded silica sand reinforcement eliminates shrinkage cracking in wide commercial and exterior joints.
Withstands heavy foot traffic, shopping trolleys, and commercial floor maintenance equipment.
Extensive palette of 24 fade-resistant colours for indoor floors, terraces, and facades.
Dense sanded formulation built to withstand commercial floor scrubbing and mild cleaning agents.
Strong Hi-Mix Grout is a cement-based, sanded powder grout engineered for tile joints ranging from 2mm to 12mm. Its high-density formula resists cracking and shrinkage, maintaining a durable, professional-looking finish in demanding environments including commercial floors and exterior facades.
Available in 24 colours, its excellent chemical resistance makes it suitable for areas exposed to cleaning agents and mild industrial chemicals. Ideal for commercial kitchens, shopping malls, and industrial tiling projects.
Estimating Bags for Your Site?
Calculate exact Strong Hi-Mix Grout quantities by square footage.
| Standard Packaging | 1KG Pouch |
|---|---|
| Available Colors | 24 Colours |
| Type | Sanded Cementitious Grout |
| Joint Width | 2 - 12 mm |
| Water Ratio | 0.25 - 0.30 L per 1 kg |
| Pot Life | Approx. 60 Minutes |
| Open Time | 15 - 20 Minutes |
| Compressive Strength | > 20 N/mm² |
| Shelf Life | 12 Months (in dry conditions) |
Preview all 24 official fade-resistant RHR grout colours against marble, porcelain, concrete, wood-look, and pool tiles across narrow rectified (1.5mm) to wide commercial (8mm) joints.
* Screen colours are digital representations of RHR's 24 standard tile grout shades. Physical RHR Shade Cards are available on request for tile showrooms, contractors, and project consultants across Karachi, Hyderabad, and Sukkur.
Ensure tile adhesive has cured for at least 24 hours. Rake out all spacer clips, dust, excess adhesive, and standing water from tile joints.
Add grout powder gradually to clean water per the Technical Data Sheet ratio. Mix to a smooth, lump-free creamy paste and let slake for 3 minutes.
Work grout firmly into joints using a rubber grout float held at a 45° angle, moving diagonally across tiles to pack joints completely.
After 15–20 minutes as surface haze forms, wipe diagonally with a damp (not dripping) sponge. Polish dry haze with a microfiber cloth after 24 hours.
Engineered for stain-free, hygienic, and durable tile joints.
Resists water, soap scum, and mould in showers & washrooms.
Stain-resistant dense finish for busy floors & splashbacks.
Smooth non-scratching fill for rectified & standard tiles.
Color-stable UV & thermal-resistant joint protection.
Official documentation, sample dispatch, and factory-direct pricing for contractors and engineers.
Use Strong Hi-Mix Grout whenever tile joint widths exceed 3mm (from 2mm up to 12mm), or on heavy-traffic commercial floors, terraces, and exterior cladding where higher compressive strength (>20 N/mm²) is required.
Mix 0.25 to 0.30 liters of clean water per 1kg pouch until a smooth, lump-free paste forms. Pot life is approximately 60 minutes.
Yes. Its sanded formulation resists thermal shrinkage and weathering on rooftops, balconies, and exterior facades.