Polymer Modified Cementitious Tile Adhesive
Polymer modified cement based tile adhesive offering good adhesion and consistent performance for general ceramic tile fixing on floors and walls.
Compare Other Tile Adhesives:
Good adhesion for standard ceramic tile fixing.
Efficient, predictable results across general tiling jobs.
Easy to spread and handle on site.
Versatile for general interior applications.
Stylo Plus Tile Bond is a polymer modified, cement based tile adhesive designed for fixing ceramic tiles on floors and walls in general residential and commercial projects. It offers good adhesion and consistent, efficient performance — a solid general purpose choice for projects where straightforward, dependable tiling is the priority.
Estimating Bags for Your Site?
Calculate exact Stylo Plus Tile Bond quantities by square footage.
| Type | Polymer Modified Cementitious Tile Adhesive |
|---|---|
| Appearance | Grey powder |
| Composition | OPC cement, graded sand, polymer additives |
| Water required | 25–30% (approx. 5–6 litres per 20 kg bag) |
| Compressive strength | ~1.0 N/mm² @ 28 days |
| Peel-off strength | ~15 KN/m |
| Pot life | Approx. 1.5 hours at 30°C |
| Coverage | 30–35 sq. ft per 20 kg bag at 3–5mm thickness |
| Packaging | 20 kg Paper Bag |
| Shelf life | 6 months in original, unopened packaging |
| Storage | Store in a dry, cool place below 35°C, away from direct sunlight |
Ensure the concrete, screed, or plaster substrate is cured, flat, structurally sound, and free from dust, oil, loose laitance, or curing compounds.
Gradually add the 20kg bag of RHR Tile Bond to 5–6 liters of clean water. Mix with a slow-speed drill mixer until a smooth, lump-free paste forms; slake 5 minutes and remix.
Key a thin contact layer onto the substrate with the flat edge of the trowel, then comb uniform ribs at a 45° angle using a notched trowel (3–5mm bed).
Press tiles firmly into wet adhesive ribs with a slight twisting motion for 100% back-butter coverage on large formats. Allow 24 hours cure before grouting.
Engineered for high-grip tile and stone installations across Pakistani climates.
Strong polymer-modified grip on floor and wall tiles.
High peel-off & shear bond strength for heavy slabs.
Moisture-resistant durability in wet zones (ReadyMix C2).
Trusted across commercial towers, villas & retail floors.
Official documentation, sample dispatch, and factory-direct pricing for contractors and engineers.
Yes, it's formulated with polymer modifiers for good, consistent adhesion.
Yes, it's suitable for general interior floor and wall tiling.
Allow 24 hours after tiling before applying grout.
Approximately 5–6 litres of clean water per 20 kg bag.
Readicam Tile Bond offers stronger bonding performance for more demanding standard jobs, while Stylo Plus Tile Bond is built for consistent, efficient results on general tiling work.