Mapro White Cement — Brilliant White Cement for Pointing by RHR & Company Pakistan
Finishing White Portland Cement (>42.5 N/mm²)

Mapro White Cement

Brilliant White Cement for Pointing

Standard Pack
1KG Pouch
Performance Index
100% Factory QC

High-purity white Portland cement for tile pointing and decorative grout work.

✓ Direct Factory Supply (Karachi, Hyderabad, Sukkur) ✓ In-House Quality Control

>90 Brilliant Whiteness Index

Pure bright-white finish for visible tile pointing, marble joints, mosaic work, and decorative renders.

>42.5 MPa Structural Strength

True White Portland Cement achieving high 28-day compressive strength without chalking.

Pigment-Friendly Base

Blends cleanly with oxide pigments for custom terrazzo, mosaic, and architectural finishes.

1kg Sealed Retail & Site Pouch

Zero clumping or moisture spoilage compared to loose open cement bags on site.

Product Overview & Uses

Mapro White Cement is a high-purity white Portland cement designed for tile pointing, decorative architectural finishes, and white cement-based grout. Its exceptional whiteness index (>90) makes it the preferred choice for visible joints, decorative panels, and any application where a clean, bright-white finish is critical.

Manufactured under strict quality controls, Mapro White Cement achieves high compressive strengths at 28 days while maintaining consistent color batch-to-batch. It can be used as-is for pointing or mixed with pigments to create a wide range of custom coloured grout and render solutions.

Technical Data Sheet

Printable PDF View →
Standard Packaging 1KG Pouch
Color Brilliant White (Whiteness > 90)
Water Ratio 0.45 - 0.50 per kg
Initial Set 45 Minutes (minimum)
Final Set 10 Hours (maximum)
Compressive Strength (28d) > 42.5 N/mm²
Application Pointing, Rendering, White Grout
Shelf Life 12 Months (in dry conditions)
Site Execution Guide

Recommended Application Process

1
01

Surface Preparation

Ensure masonry, concrete, or ceiling surface is sound and free from dust, form-release oil, grease, and loose mortar particles.

2
02

Clean Water Mixing

Mix Mapro Cement with clean water (0.45–0.50 ratio) or graded fine aggregate/pigment to achieve a cohesive, workable mortar paste.

3
03

Trowel / Float Application

Press firmly into tile joints, pointing lines, or repair patches using a steel trowel or pointing tool, compacting thoroughly.

4
04

Finishing & Curing

Strike off excess material cleanly with a damp sponge and mist-cure cementitious repairs for 3–7 days to maximize 28-day strength.

Where to Use Mapro White Cement

High-strength Portland cement performance for pointing, rendering, and repairs.

Tile & Marble Pointing

Clean, high-strength joint filling and stone bedding.

Architectural Rendering

Weather-durable exterior & interior decorative finishes.

Structural Patching

High >42.5 MPa strength for masonry & plumbing repairs.

Custom Terrazzo & Mosaic

Consistent base for pigment mixing & decorative floors.

Frequently Asked Questions — Mapro White Cement

What is Mapro White Cement used for?

Mapro White Cement is used for tile pointing, white marble joint filling, decorative architectural rendering, mosaic/terrazzo work, and small masonry repairs requiring a bright white (>90 whiteness) finish.

What compressive strength does Mapro White Cement achieve?

It achieves over 42.5 N/mm² compressive strength at 28 days while maintaining batch-to-batch color purity.