Tile Stone Tile Bond — Polymer Modified Cementitious Tile Adhesive by RHR & Company Pakistan
Tile Adhesives Marble & Natural Stone Adhesive

Tile Stone Tile Bond

Polymer Modified Cementitious Tile Adhesive

Standard Pack
20 kg Plastic Bag
Performance Index
80% Factory QC

Polymer modified cement-based tile adhesive offering effective adhesion for standard ceramic tile fixing on floors and walls at a practical price point.

✓ Direct Factory Supply (Karachi, Hyderabad, Sukkur) ✓ In-House Quality Control

Polymer Modified Formula

Effective adhesion for standard ceramic tile fixing.

Practical Performance

Suited to everyday tiling jobs.

Smooth Workability

Easy to spread and apply on site.

Suitable for Floors and Walls

Versatile for general interior applications.

Product Overview & Uses

Tile Stone Tile Bond is a polymer modified, cement-based tile adhesive built for fixing ceramic tiles on floors and walls in standard residential and commercial jobs. It delivers effective, no-fuss adhesion for everyday tiling work — a practical option where straightforward performance matters more than premium specification.

Applications

  • Fixing ceramic tiles on interior floors and walls
  • Standard residential and commercial tiling work
  • Projects where practical, effective adhesion is needed at an accessible grade

Directions for Use

  • Surface Preparation: Prepare the surface clean, sound, and free from dust, grease, or loose material.
  • Mixing: Mix one 20 kg bag with approximately 5–6 litres of clean water to a smooth, lump-free consistency, and use within its pot life (approx. 1.5 hours).
  • Application: Apply with a notched trowel and press tiles firmly into place.
  • Finishing: Allow tiling to set for 24 hours before grouting, and clean tools with water immediately after use.

Estimating Bags for Your Site?

Calculate exact Tile Stone Tile Bond quantities by square footage.

Open Calculator →

Technical Data Sheet

Printable PDF View →
Type Polymer Modified Cementitious Tile Adhesive
Appearance Grey powder
Composition OPC cement, graded sand, polymer additives
Water required 25–30% (approx. 5–6 litres per 20 kg bag)
Compressive strength ~0.9 N/mm² @ 28 days
Peel-off strength ~13 KN/m
Pot life Approx. 1.5 hours at 30°C
Coverage 30–35 sq. ft per 20 kg bag at 3–5mm thickness
Packaging 20 kg Plastic Bag
Shelf life 6 months in original, unopened packaging
Storage Store in a dry, cool place below 35°C, away from direct sunlight
Site Execution Guide

Recommended Application Process

1
01

Surface Preparation

Ensure the concrete, screed, or plaster substrate is cured, flat, structurally sound, and free from dust, oil, loose laitance, or curing compounds.

2
02

Mechanical Mixing

Gradually add the 20kg bag of RHR Tile Bond to 5–6 liters of clean water. Mix with a slow-speed drill mixer until a smooth, lump-free paste forms; slake 5 minutes and remix.

3
03

Notched Trowel Combing

Key a thin contact layer onto the substrate with the flat edge of the trowel, then comb uniform ribs at a 45° angle using a notched trowel (3–5mm bed).

4
04

Bedding & Grouting

Press tiles firmly into wet adhesive ribs with a slight twisting motion for 100% back-butter coverage on large formats. Allow 24 hours cure before grouting.

Where to Use Tile Stone Tile Bond

Engineered for high-grip tile and stone installations across Pakistani climates.

Ceramic & Porcelain Tiles

Strong polymer-modified grip on floor and wall tiles.

Marble, Granite & Stone

High peel-off & shear bond strength for heavy slabs.

Bathrooms, Kitchens & Pools

Moisture-resistant durability in wet zones (ReadyMix C2).

Residential & High-Rise

Trusted across commercial towers, villas & retail floors.

Frequently Asked Questions

Is Tile Stone Tile Bond polymer modified?

Yes, it's formulated with polymer modifiers for effective, dependable adhesion.

Can it be used for both floors and walls?

Yes, it's suitable for standard interior floor and wall tiling.

How long before I can grout?

Allow 24 hours after tiling before applying grout.

How much water do I need per bag?

Approximately 5–6 litres of clean water per 20 kg bag.

What's the difference between this and Stylo Plus Tile Bond?

Stylo Plus Tile Bond offers slightly stronger adhesion for more demanding general-purpose jobs, while Tile Stone Tile Bond is built for straightforward, practical tiling at a more accessible grade.