Welcome to
Premium Construction Solutions
Total Tile Bond
Polymer Modified Cementitious Tile Adhesive
Polymer modified cement-based tile adhesive offering dependable value for standard ceramic tile fixing on floors and walls.
Standard Packaging
Industrial Bag / Container
Other Tile Adhesives
In-Depth Overview
Total Tile Bond is a polymer modified, cement-based tile adhesive built for fixing ceramic tiles on floors and walls in standard residential and commercial projects. It's designed to meet essential tiling requirements reliably — a dependable value choice for budget-conscious projects that still need a trustworthy bond.
Applications
- Fixing ceramic tiles on interior floors and walls
- Standard residential and commercial tiling work
- Budget-conscious projects needing dependable, essential-grade adhesion
Directions for Use
- Surface Preparation: Prepare the surface clean, sound, and free from dust, grease, or loose material.
- Mixing: Mix one 20 kg bag with approximately 5–6 litres of clean water to a smooth, lump-free consistency, and use within its pot life (approx. 1.5 hours).
- Application: Apply with a notched trowel and press tiles firmly into place.
- Finishing: Allow tiling to set for 24 hours before grouting, and clean tools with water immediately after use.
Technical Data Sheet
| Type | Polymer Modified Cementitious Tile Adhesive |
|---|---|
| Appearance | Grey powder |
| Composition | OPC cement, graded sand, polymer additives |
| Water required | 25–30% (approx. 5–6 litres per 20 kg bag) |
| Compressive strength | ~0.8 N/mm² @ 28 days |
| Peel-off strength | ~11 KN/m |
| Pot life | Approx. 1.5 hours at 30°C |
| Coverage | 30–35 sq. ft per 20 kg bag at 3–5mm thickness |
| Packaging | 20 kg PP Woven Bag |
| Shelf life | 6 months in original, unopened packaging |
| Storage | Store in a dry, cool place below 35°C, away from direct sunlight |
Standard Application Process
Surface Prep
Ensure the substrate is fully cured, structurally sound, clean, and free of dust, oil, or curing compounds.
Mixing
Gradually add the 20kg powder to clean water. Mix with a slow-speed drill until a lump-free paste forms.
Application
Apply material using the flat side of the trowel, then comb with a notched trowel suitable for the job.
Installation
Press firmly into the wet material with a slight twisting motion to ensure 100% rear coverage.
Application Suitability
Engineered for versatile, high-stress environments.
Interior & Exterior
Facades, walls, and floors.
Natural Stone & Tiles
Marble, granite & imported tiles.
Wet Areas
Swimming pools, kitchens & bathrooms.
Heavy Cladding
Exterior facades & decorative stone.
Technical Resources
Download official documentation for project approval.
Frequently Asked Questions
Is Total Tile Bond polymer modified?
Yes, it's formulated with polymer modifiers for dependable adhesion.
Can it be used for both floors and walls?
Yes, it's suitable for standard interior floor and wall tiling.
How long before I can grout?
Allow 24 hours after tiling before applying grout.
How much water do I need per bag?
Approximately 5–6 litres of clean water per 20 kg bag.
What's the difference between this and Tile Stone Tile Bond?
Tile Stone Tile Bond offers slightly stronger adhesion for more demanding standard jobs, while Total Tile Bond is built as a dependable value option for essential tiling needs.